Yesterday, the Wenzhou Municipal Party Committee and the Municipal Government issued the "Implementation Opinions on the Reform of the Official Car System in Wenzhou City-level Organs" (hereinafter referred to as the "Opinions"), and officially launched the reform of the official car system for municipal-level organs. Wenzhou plans to formulate and improve the vehicle reform plan by the end of June this year, and basically complete the vehicle modification task of “cancellation of special vehicles and full-time drivers†before the end of the year.
According to People's Network Reported that the city-level government vehicle reform targets include municipal party and government organs, people's congresses, CPPCC institutions, institutions, democratic parties, mass organizations (including associations, associations, etc. sponsored by the above-mentioned organs) and municipal-level functional areas. All the official vehicles except the law enforcement duty vehicles that must be retained by the leading cadres. Hospitals, schools and public security, procuratorial, courts, national security and other units will not participate in the car reform.
"Recent monetization, long-term marketization" is the basic idea of ​​Wenzhou car reform. Wenzhou City has changed the “objects for personal service vehicles of municipal-level organs†into seven categories, and successively carried out monetization subsidies. The highest is the actual county cadre, the average annual car stickers totaled 33,600 yuan, followed by the deputy county-level practical cadres (including researchers), the annual average of 26,400 yuan; the lowest "collectors, clerks and other personnel", the average annual The total amount of car stickers is 4,800 yuan.
Relevant personnel pointed out that monetizing the car is not equal to increasing the income of the relevant personnel. The "Opinions" stipulates: "The official vehicle subsidy is included in the public funds of the vehicle reform unit. The vehicle sticker is the transportation expenses for official activities, and is not included in the personal wage income. All of them are deposited in the special account of the citizen card, and cannot be cashed or misappropriated. use."
According to reports, Wenzhou's car reform is as smooth and human as possible. The drivers of the car reform unit are working in accordance with the four principles of retention, early retirement, retention of positions, and self-employment. After completing the work of vehicle delivery and driver diversion, the vehicle modification unit will issue vehicle subsidies to the vehicle reform personnel from the following month. Wenzhou City strives to complete the vehicle reform task before the end of this year, and provide certain experience and practices for the reform of the bus of the national organs and institutions.
A.The input power supply is three-phase 380V50HZ. The voltage waveform is sinusoidal, and the amplitude fluctuation is not greater than+5~- 10%. The frequency fluctuation shall not be greater than 2HZ, and each phase shall be symmetrical. There are no higher harmonics in the power grid that are sufficient to damage the frequency converter. B. Temperature: 0~40 ℃ C.Humidity: The relative humidity shall not exceed 85% (20 ℃±5 ℃),D. Altitude: less than 1000 meters E. No severe vibration and impact
LZ600 wire drawing machine
1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.
1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.
1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.
1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.
1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.
1. 6 Before starting the machine, check whether the safety device is normal.
1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.
1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.
1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.
The second Delivery inspection
2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.
2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.
2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.
bobbin spooler machine coiler machine
Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com