Spare Parts Wear Chocky Bar for Sale CB65/CB90

Hyster Material Technology Co., Ltd., mainly manufacture and export bi-metallic wear blocks/bars(15/3CrMo, 700BHN-63HRC) overlay wear plates, Ni-hard wear liners, Tungsten carbide wear parts, Shredder hammer tips, knife edges and precision casting parts for Mining, Quarrying, Cement, Concrete, Sugar, Re-cycling and other heavy industries for more than 20 years. We can also provide professional wear solutions for your application.

Typical Products: Chocky wear bars and Wear buttons, Bucket attachments, Wear liners/plates, Standard wear bars, Shredder/Grander hammer tips, Overlay wear plates, Skid bars, Knife edges, Crusher parts, Precision castings and other wear parts etc.



Chocky Bars

The unique, formable design of Hyster-Wear chocky bars are available in various lengths, grades and sizes and can also be customized as per the clients specific need. Applications for Chocky Bars are wide and varied, ranging from specific wear protection on buckets for loaders, excavators and draglines machines, or for weld-on hammer tips for the re-cycling industry, or chute linings and rock box edges.

They are easy to use and install. They can be bent, cut and formed to suit different surfaces.

The standard thickness of chocky bars is 23 mm, standard length is 240 mm, width could be from 25mm from 150mm. We can also produce according to your special requests.
 

A. Material:
Wear portion is Domite, white iron(high chrome carbide). ASTM A532 15/3CrMo.
Impact portion is mild steel.

B. Chemical: C 2.5-3.5;  Cr 15-18;  Mo 0.5-2.5

C. Mechanical Property:
1) Tensile Strength 630Mpa Min.
2) Shearing Strength 250Mpa Min.
3) Hardness 63 HRC'
                                                                                                   

Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).

 

                                                                                                   

RFQ:

Q: Are you trading company or manufacturer ?
A: We are ISO9001:2008 Certificated factory, real manufacturer, not trade company.

Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: 30% in advance,balance against copy of B/L, payable via T/T.

If you have another question, pls feel free to contact us as below:

  Hyster Material Technology Co., Ltd., mainly manufacture and export bi-metallic wear blocks/bars(15/3CrMo, 700BHN-63HRC) overlay wear plates, Ni-hard wear liners, Tungsten carbide wear parts, Shredder hammer tips, knife edges and precision casting parts for Mining, Quarrying, Cement, Concrete, Sugar, Re-cycling and other heavy industries for more than 20 years. We can also provide professional wear solutions for your application.

Typical Products: Chocky wear bars and Wear buttons, Bucket attachments, Wear liners/plates, Standard wear bars, Shredder/Grander hammer tips, Overlay wear plates, Skid bars, Knife edges, Crusher parts, Precision castings and other wear parts etc.



Chocky Bars

The unique, formable design of Hyster-Wear chocky bars are available in various lengths, grades and sizes and can also be customized as per the clients specific need. Applications for Chocky Bars are wide and varied, ranging from specific wear protection on buckets for loaders, excavators and draglines machines, or for weld-on hammer tips for the re-cycling industry, or chute linings and rock box edges.

They are easy to use and install. They can be bent, cut and formed to suit different surfaces.

The standard thickness of chocky bars is 23 mm, standard length is 240 mm, width could be from 25mm from 150mm. We can also produce according to your special requests.
 

A. Material:
Wear portion is Domite, white iron(high chrome carbide). ASTM A532 15/3CrMo.
Impact portion is mild steel.

B. Chemical: C 2.5-3.5;  Cr 15-18;  Mo 0.5-2.5

C. Mechanical Property:
1) Tensile Strength 630Mpa Min.
2) Shearing Strength 250Mpa Min.
3) Hardness 63 HRC'
                                                                                                   

Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).

 

                                                                                                   

RFQ:

Q: Are you trading company or manufacturer ?
A: We are ISO9001:2008 Certificated factory, real manufacturer, not trade company.

Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: 30% in advance,balance against copy of B/L, payable via T/T.

If you have another question, pls feel free to contact us as below: