High Torque Powder Coating Twin-Screw Extruder

Basic information

Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.

Principle

After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of  screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.

Features:

1. Screw segments and kneading blocks are designed and manufactured to be uniform clearance between two screw-shafts during operation by 3D-CAD&CAM. Self-wiping and no solidified particle.

2. Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.

3. Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precise processing. Excellent performance, and long lifetime.

4. The barrel is designed with efficient heating/cooling system. Multiple temperature zones are precisely controlled within ±2ºC.

5. Gear box is designed with high-torque, low-noise, centralized lubricating and oil temperature control/alarm system.

6. Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.

7. PLC and HMI are used for control with friendly interaction, easy to operate.

8.All processing parameters are recipe-mode managed (data storage, recall and modify).

9.Comprehensive safety protection system.

10.Easy clean and maintenance.
Basic information

Twin Screw Extruder of Series TSE is designed with two co-rotating screw-shafts. Raw materials are perfectly to be dispersed and distributed at thermo-melting status by precise kneading-elements with high speed in the barrel. Twin Screw Extruder is a very important equipment for powder coatings processing.

Principle

After the materials into the hopper, materials are uniformly feeding into the screw barrel of extruder though the feed screw , and then by syntropy high speed rotation of a pair of  screw to transport material to extrude and melting mix, which the multi-component materials achieving the best distribution and dispersion effect in the thermal conditions.

Features:

1. Screw segments and kneading blocks are designed and manufactured to be uniform clearance between two screw-shafts during operation by 3D-CAD&CAM. Self-wiping and no solidified particle.

2. Screw segments and kneading blocks on screw-shafts could be configured optimally according to technology requirements of powder coating processing.

3. Screw segments, kneading blocks, liners and shafts are made of high-quality alloy steel with heat-treatment and precise processing. Excellent performance, and long lifetime.

4. The barrel is designed with efficient heating/cooling system. Multiple temperature zones are precisely controlled within ±2ºC.

5. Gear box is designed with high-torque, low-noise, centralized lubricating and oil temperature control/alarm system.

6. Feeding system is designed with metering screw and anti-lag device. Homogeneous and accurate feeding. Metal separator is optional.

7. PLC and HMI are used for control with friendly interaction, easy to operate.

8.All processing parameters are recipe-mode managed (data storage, recall and modify).

9.Comprehensive safety protection system.

10.Easy clean and maintenance.

Passenger Electric Vehicle

Passenger Electric Vehicle,Electric Mini Tricycle,Red Manned Electric Tricycle,Motor For Electric Vehicle

FengXian Enland International Trading Co.,LTD , https://www.enlandvehicle.com