Marine Docking or Ship Used Yokohama Fender

Model NO.: XC20151226007

Engine: 4 Stroke

Engine Type: Outboard

Usage: Ship Launching, Protection, Ship Docking

Certification: ISO9001, CCS, CCC

Feature: Wear-Resistant

Load Capacity: >8000teu

Color: Black

Trademark: xincheng

Specification: according the size

Origin: Qingdao

HS Code: 4016999000

1. Reacting force is samll
2. Large energy absorption
3. Saftey, protection, collision avoidance
4. Easy to be installed
Yokohama fender
D=2.5m L =5.5m
Recation force: 2019KN Energy absorption: 943KJ
The initial pressure is 0.05MPa

Yokohama fender

Specifications of others can be customized according to customer required

Structure of pneumatic rubber fender for ship
Out adhesive: Protective cord layer and inner adhesive have high tensile strength and abrasion resistance.

Cord layer: Strong layer of the pneumatic rubber fender is made from winding the high strength polyamide fibre cord fabric.

Inner adhesive: The cord layer of pneumatic rubber fender assures no gas leakage from the compressor.

End-flange: The end-flange is a part to fix air valve component, buried metal part and the cord layer and used for hoisting, and filling ans discharging gas. The structure of the end-flange is shown in Fig.

Note about applying Pneumatic rubber fender

1. Frenquently check whether the airbag spheroid is damaged and whether the pressure is normal, and the valve core must be replaced every six months.

2. The steel wire should wrap the rubber pipe, when tying steel wire to pneumatic rubber fender in case the the fender is stabbed.

3. The surace or subject next to the pneumatic rubber fender cant be hard and sharp-point in case the fender is stabbed.

4. The accessories and jips nut cant be loose when testing the internal pressure.

5. When applying the pneumatic rubber fender, the rope net should be reliable, the steel wire used for hanging metal parts and the hook link cant be tied in disorder.

Storage of Pneumatic rubber fender

1. When not using for a long time, wash the fender surface, dry up and fill in sufficient right amount of compressed air to lay in a cool, dry and well-ventilated place.

2. The storage place of pneumatic rubber fender should be far away from heat source.

3. Try to keep fender away from acid, alkali, grease and organic solvents.

4. When not applying the fender, the pneumatic rubber fender cant be piled up and heavy itiems cant be piled on the fender.

SizeÂ ofÂ specification D*L	PressureÂ initiallyÂ inside Â	CompressionÂ amount 60%		MaximumÂ pressureÂ inside Â	TestÂ pressure Â	SafetyÂ valveÂ setting Â	ThisÂ weightÂ amount	TheÂ heavyÂ enclosureÂ ofÂ networkconsuitsÂ weight
SizeÂ ofÂ specification D*L	PressureÂ initiallyÂ inside Â	Against strength	SuckÂ energy Â					RollerÂ chain	DiameterÂ ofÂ theÂ rollerÂ chain
(mm)*(mm)	Mpa	KN	KN.m	Mpa	Mpa	Mpa	kg	kg	(mm)
500*1000	0.08	84	9	0.174	0.2		26
600*1000	0.08	96	12	0.167	0.2		33
700*1000	0.08	179	25	0.165	0.2		49
1000*1500	0.08	236	47	0.175	0.2		82
1000*2000	0.08	337	66	0.167	0.2		126	308	12
1200*2000	0.08	386	89	0.172	0.2		168	480	12
1350*2500	0.08	554	143	0.175	0.2		226	530	12
1500*3000	0.08	756	215	0.169	0.2		372	616	14
1700*3000	0.08	829	262	0.169	0.2		438	656	14
2000*3500	0.08	1126	424	0.181	0.25		634	736	14
2500*4000	0.08	1817	925	0.163	0.25	0.23	1112	998	16
2500*5500	0.08	2653	1327	0.161	0.3	0.23	1428	1160	16
3000*5000	0.08	2689	1558	0.158	0.3	0.23	2158	2222	16
3000*6000	0.08	3275	1878	0.158	0.3	0.23	3292	2347	16
3300*4500	0.08	3476	1640	0.159	0.3	0.23	3492	2648	19
3300*6000	0.08	3652	2338	0.148	0.3	0.23	3652	2940	19
3300*6500	0.08	3829	2508	0.148	0.3	0.23	3961	4520	19

rubber silicone injection molding machine

rubber silicone injection molding machine,Silicone injection molding,Silicone Injection Molding Machine,Liquid silicone injection molding

Ningbo Huacheng Rubber And Plastic Machinery Co., Ltd , https://www.hacen-machinery.com