Recently, the ancient Xiongren Road site not far from Kuanzhai Alley was discovered by the Chengdu Institute of Cultural Relics and Archeology. A large number of stone Buddhas appeared from the Northern and Southern Dynasties to the Tang Dynasty. Some of the statues were affixed with gold; Totem King is extremely rare in China.
The reporter learned that the site is located on Xiarenren Road, adjacent to Industrial Street in the north and about 200 meters from the Kuanzhai Alley Block in the southeast direction. At the same time, the eastern part of the ruins area has preserved a part of the wall. It is about 45.5 meters long from north to south, about 23.5 meters at its widest point, and about 6.7 meters at its highest point. It is reported that in 2012 the city’s archeological team confirmed that it belongs to the Western Wall of Luocheng since the late Tang Dynasty.
Yi Li, the team leader of the Municipal Archaeological Team, introduced the excavated porcelain, pottery, stone statues, building materials and coins and other relics. The two ash pits, numbered H3 and H6, were the most important. A large number of stone Buddha statues were buried in the pit. He said that there are more than 50 stone Buddha statues found in the H3 ash pit, including the monolithic Buddha, Bodhisattva, and Uranus, as well as a combination of back-screen type sculptures. These statues are all red sandstone textures. There are gold stickers on individual statues, which are exquisitely carved and precious.
The reporter learned that there is a back-screening statue in the stone Buddha image that was sent to the Southern Dynasty during the "Liu Tianjian 15 years" (AD 516). At the same time, there is another piece of monolithic seated statue of Toda King that is extremely rare in China. Yi Li said that judging from the preliminary judgment results, the times of these sculptures were concentrated between the Northern and Southern Dynasties and the Tang Dynasty, and most of the statues belonged to the Southern Dynasties; however, judging from the unearthed porcelains in the pits, the H3 buried time was from the Wudai to the early Northern Song Dynasty. . In addition, more than 30 pieces of stone carvings have been unearthed in the H6 ash pit, of which there are many avatars in the Lohan, and the times are mostly in the Tang Dynasty.
Yi Li introduced that during the Southern and Northern Dynasties, the development of Buddhist art reached the first peak period. From the literature, it can be known that the Southern Dynasties belonged to the Buddhist cultural center at that time and had a great influence on the Northern Dynasties' Buddhist art. However, compared with the rich relics of the Northern Dynasties, the physical materials of the Southern Dynasties are extremely rare. The known Southern Dynasties are mostly concentrated in the Sichuan region, especially in Chengdu. However, the total number that can be seen at present is only 70 or 80 pieces, and the unearthing of many statues lacks scientific archaeological excavation basis. He said that there were dozens of Southern Dynasties statues found in the H3 ash pit, and there were clear relations between the land sites and horizons, which provided new information for the academic community to further understand the Southern Dynasties.
Disclaimer: All the works that indicate the source of this site are copyrighted or have the right to use the works legally owned by this site, welcome to reprint and indicate the source. All non-Bennet works are from the Internet, and the purpose of the reprint is to convey more information. It does not mean that this site agrees with its views and is responsible for its authenticity.
Steel material machining parts
NINGBO RUICAN MACHINERY COMPANY can meet high and tight tolerance by CNC MACHINING process with [igs" or "stp" format drawings.
Our Machining Capabilities:
CNC Turning – CNC multi-axis machining centers for superior speed & flexibility
Custom Machining - expert machined components delivered on time
Screw Machine Products – precision components from a broad variety of materials & Equipment
Machining – micro-parts to 1-1/2 round diameter providing speed, high capability including precision tolerances and specialized finishes
High Volume Machining – Specialized in machined parts exceeding 500 pieces up to millions of pieces for optimum efficiency
CNC Milling - Machining from bar stock, plate or block metal using up to 3 axis of motion
Steel Material Machining Parts,Custom Metal Parts Fabrication,Steel Material CNC Machining Parts,Machining Stainless Steel Parts
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.ruicanmanufacturer.com