Maintenance method of double-color quartz tube liquid level gauge Maintenance method and steps of double-color quartz tube liquid level gauge:
First, the instrument surface cleaning step 1 first with a dry cotton cloth or a clean wiping paper to wipe the surface of the instrument used to wipe the surface of the instrument oil and dust must pay attention to gently wipe to protect the instrument surface will not be injured.
2. Use a clean cotton cloth to wipe the surface of the meter, especially the metal part.
二〠Instrumentation Mirror Wipe Step 1· Wipe the mirror gently with a wiping mirror paper. Do not use force to avoid damage to the mirror.
2. Use a cotton swab to pick up the industrial alcohol, wipe the mirror, and wait until the surface of the meter has dried completely.
3ã€Mirror wiping can be divided into calibration glass lens and lens lens group. Because the dust particles can cause black spots, mirror wiping is very important. After installation, the wiping effect must be observed with the help of images.
Third, the instrument rotating part of the dry friction part of the maintenance steps 1 first with a dry cotton cloth to wipe the surface, wipe the oil dust.
2· Blowers can also be used to blow off dust.
3· If necessary, use a cotton swab to wipe the surface with industrial alcohol.
IV. Lubrication Section Maintenance Step 1 • Wipe the surface dust with a dry cotton cloth. 2. Lubricate the lubrication oil or add grease.
First, the instrument surface cleaning step 1 first with a dry cotton cloth or a clean wiping paper to wipe the surface of the instrument used to wipe the surface of the instrument oil and dust must pay attention to gently wipe to protect the instrument surface will not be injured.
2. Use a clean cotton cloth to wipe the surface of the meter, especially the metal part.
二〠Instrumentation Mirror Wipe Step 1· Wipe the mirror gently with a wiping mirror paper. Do not use force to avoid damage to the mirror.
2. Use a cotton swab to pick up the industrial alcohol, wipe the mirror, and wait until the surface of the meter has dried completely.
3ã€Mirror wiping can be divided into calibration glass lens and lens lens group. Because the dust particles can cause black spots, mirror wiping is very important. After installation, the wiping effect must be observed with the help of images.
Third, the instrument rotating part of the dry friction part of the maintenance steps 1 first with a dry cotton cloth to wipe the surface, wipe the oil dust.
2· Blowers can also be used to blow off dust.
3· If necessary, use a cotton swab to wipe the surface with industrial alcohol.
IV. Lubrication Section Maintenance Step 1 • Wipe the surface dust with a dry cotton cloth. 2. Lubricate the lubrication oil or add grease.
Aluminum Rod,Aluminum Rod Bar,Aluminum Hollow Bar,5052 Aluminum Round Bar
Shandong Great Steel Co.,Ltd , https://www.great-steel.com