Water Hammer Pumping is an ancient and advanced technology that utilizes a water hammer effect to directly convert a low water head into a high water head. Abroad has more than two hundred years of history in its theory and structure application, and the technology is relatively mature. Low drop water can be used to deliver high-lift water. Water is the power of water, with no electricity, oil, coal and other energy sources, day and night to automatically raise water, head high, simple management, long life and so on. For power shortage, non-electric mountainous areas, Mid-Levels irrigation and people, livestock water and mountain orchard sprinkler. Such as the use of "savings combined with" to solve drought and other mountain water. At the same time also has the far-reaching significance of saving energy and no environmental pollution.
Commonly used water hammer pump BIL-630 and BIL-420 two models. The meaning of the inlet and outlet pipes are 6 inches into 3 inches out and 4 inches into 2 inches out.
Installation environment (conditions): 1, low head water sufficient, it is best to have running water for many years, and to meet the water requirements (water flow of 2 to 3 treadmill water can be). 2, there is a certain drop (1.5 meters to 4 meters, the best for 4 meters) of the stream, the dam outside the drainage or artificial artificial gap. 3, the height needs of domestic water or irrigation water.
Construction investment: 1, water hammer pump itself is about 12,000 yuan price. 2, water hammer pump inlet 4 to 6 inches of seamless steel pipe 32 meters, outlet pipe 2 to 4 inches of tap water iron pipe tens to hundreds of meters, after leaving the water hammer pump 20 to 30 meters can be replaced by plastic pipe. 3, water hammer pump concrete base, the inlet of concrete earth shock pier and water inlet about 2 cubic meters of storage tanks, water lifting capacity of larger reservoirs and other facilities. The total cost of the three items is about 50,000 yuan.
Economic Benefits: Water hammer pump life is very long, can be used for about 30 years, usually the maintenance costs are also very provincial, do not need to build the engine room, do not need someone on duty management, as long as the appropriate time to replace the seal and coated once a year paint ; Water Hammer Pump Water pumping capacity and raise the water lift high. Height up to 30 meters or higher, of course, the higher the smaller the flow rate. At a lift height of 30 meters, the machine with a lift of 630 in 24 hours was 70 tons and the machine with 420 was 18.7 tons. In terms of economic benefits, do not say that the use of water hammer pumps because there is no electricity, that is, the use of water hammer pumps in electric areas is also very cost-effective.
Cast iron chamber filter press
The cast iron filter press is made of high-quality cast iron or nodular cast iron precision casting. It is divided into two types: box type and plate and frame type. The compression methods include hydraulic compression plate and frame cast iron filter press, manual compression plate and frame cast iron filter press, Mechanical compression plate and frame cast iron filter press, hydraulic compression box type cast iron filter press, automatic plate hydraulic compression cast iron filter press, etc., models are 320, 450, 630, 800, 1000, and the filtration area is from 1 Square to 120 square, handling capacity from 1L to 1200L.
Product advantages (features) :
1. Suitable for high temperature material filtration
2. The Filter Plate has high strength, high filtration pressure and long service life. It is widely used in the solid-liquid separation of petrochemical industry, metallurgy, oil and ceramic industry.
Suitable for high viscosity, high temperature, require low moisture content of ceramic industry, petrochemical, oil, mechanical oil decolorization and other products filtration.
electric pressing,chamber filter press,electric mechanical,High-temperature material
Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com