The machine is a kind of electric tensile tester which adopts the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically on micro computer or host computer.
Â
Application:
Testing Equipment is used to test strength tension, compression, shearing force, adhesion, peeling force, tear strength and other force of specimen, semiproduct and finished product in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, petrochemistry, electric appliance, automobile,...etc. , which are the basic facilities for input quality control (I.Q.C), Quality Control (Q.C.), Physical Inspection, Mechanics Research and Material Development.
Â
Features:
1. a variety of measurement units, Measure In Imperial & Metric are switchable;
2. the software interface with three languages in Simplified Chinese, Traditional Chinese and English, which can be switched easily
3. The pattern of Test reports can be self -designated; test data can be displayed directly in the main screen;
4. User-defined Test methods; with experimental data analysis function;
5. a single-screen operation; do not need to switch the screen.
6. comparative mode at the same time to make a number of curve data comparison;
7. High quality, accurate and reliable models with competitive price.
8. Motor system: Panasonic servo motor +Panasonic servo driver +ball screw (Taiwan) +Leeming reduction gears +synchronous belt driver;
9. Computer servo system :Desktop computer servo control tensile tester dedicated
10. Windows interface to test software it can achieve to set speed, load, power time, Breakpoint proportion, more order control mode and meet different test requirement.
11. Displacement resolution: 0.001mm
12. Safety device: overload emergency stop device, fluctuation travel limit device, leakage automatic broken electricity system, automatic breakpoint stop function.
Â
Technical parameters:
| Â Capacity | Â 500N, 1KN, 2KN, 5KN, 10KN, 20KN (optional) |
|  Units |  gf, kgf, N, LBf, W, kN, T |
| Â Load Resolution | Â 1/250, 000 |
|  Load Accuracy |  within ± 0.5% |
| Â Maximum trip | Â 1000mm (excluding fixture) |
|  Test  speed |  (0.1-500)mm/min |
|  Outside Dimension(L× W× H) |  985× 510× 1600mm |
| Â Weight | Â 70~150kg |
| Â Power | Â 1 phase, 220V/50HZ |
| Â Motor | Â Servo Motor, frequency conversion motor |
| Â Driver | Â High presice ball screw |
|  Accessory | One set of standard fixture for tension fixture, one computer |
| Fixtures type | Different fixture can be customized |
CORE PARTS:
Â
Â
Suspended platform, as temporary suspended cradle platform, are widely applied in maintenance applications such as curtain fecade cleaning in high rise building, painting, glazing repairs, bill- board painting, cable installation and other outer working of high rise building up to 150 meters about 30 floors high. Our ZLP series suspended platform cradle, ZLP1000, ZLP800, ZLP630, ZLP500, ZLP400 and ZLP150, are good choices for fulfill above outside of wall work. Based on the different materials, the suspended platform could be divided into Aluminum Working Platform, steel Working Platform, galvanized Working Platform.
ZLP series temporarily installed suspended platform is an ideal access equipment for building facade construction, decoration, cleaning and maintenance. It can be also applied to other aerial working such as elevator installing, ship building, construction of dam, bridge, large chimney, etc.
This equipment is easy to operate, convenient to move and reliable in safety and much more efficient than traditional scaffolding.
Suspended Working Platform,Suspended Cradle Platform,Aluminum Working Platform,Suspended Construction Platform,Working Platform Cradle
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com