Stainless Steel Fruit Slicing Machine Vegetable Slicer

Stainless steel fruit slicing machine vegetable slicer


Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.



Basic parameters of automatic cutting machinery:

Main technical parameters of vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm



3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.


 

Stainless steel fruit slicing machine vegetable slicer


Main use of vegetable cutter:
It is suitable for all kinds of vegetable processing in food industry such as dehydration, quick-freezing, fresh and pickling etc.
Cut into chunks: such as shallots (chives), leeks, leeks, celery, cilantro, peas, and beans;
Cutintopieces:Cabbage, olives vegetable, spinach.
Slice:yam, bamboo shoots and burdock.
Cut into shreds:potato,carrot,radish,lotus root.



Basic parameters of automatic cutting machinery:

Main technical parameters of vegetable cutting machine:
1.Cut into chunks:
Use special tool to cut stem material.The section length of the cutting material can be adjusted between 2-30mm.
2.Cutintopieces:
Use special cutting tool to cut material into 10*10-25*25mm



3.Cut into shreds:
Cut the material into wire with special cutting tool.The cut section is 3*3-10*10mm, with a length of 30mm (shred, dice, carrots).
4.Cutting tool Angle cutting:
Change the cutting tool and chute feeder installation Angle can be cut 30° to 45°oblique.The two kinds of cutting methods: horizontal and oblique cut.
5. Production: 500-2000kg/h.
6. Appearance: 1200*800* 1350mm, feeding tank 140*1000mm.
7. You can customize various knives.


 

1600mm Nonwoven Lines

The 1600 spunbond nonwoven production lines use PP as raw material to produce pp nonwoven fabric, adopting the technology of air, drawing into webbing by negative pressure. The product of nonwoven machine series is usually applied into the area of packaging, waterproof material, packaging base lining and so on.

The single beam nonwoven machine with 1600mm width is the small type machine, and the product of this is applied in the area of shopping bags, disposable slippers, packaging, linning, and etc. There are various application of PP nonwoven fabric.

The width of nonwoven fabric of Non-woven Fabric Line can be 1600mm, 2400mm, 3200mm, and 4200mm.

Advantages of spunbond non woven line:

1. It is easier and faster to change the color of nonwoven fabric and there is not too much waste nonwoven fabric during the period of changing color.

2. The land and space are less, the labor is less, and operation is easier.

1.6m Spunbond Nonwoven Line,1.6m Single Beam Spunbond Nonwoven Line,Nonwoven Fabric Product Line,Nonwoven Fabric Production Line

Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yy-machinery.com