A few days ago, it was learned from the Shanxi Coal and Chemical Industry Association that the coal coking and recycling economy integration project of Shanxi Coking Coal Group Co., Ltd. and Shenhua Group is currently advancing rapidly. The project was established in September 2010 and the project pre-feasibility study preparation meeting was held in April 2011. The project plans to construct and construct three coking industrial parks in Hongdong Zhaocheng Fine Chemical Coal Chemical Industry Park, Xiangyang Sanquan Coking Industrial Park, and Xiaoyi Wutong Economic Development Zone. It is planned to adopt “internal restructuring, external integration, and simultaneous promotion of each park construction†and “ The Zhaocheng Park was the first to advance, and other planned park cameras followed up the "two implementation promotion plans."
Precautions for daily maintenance of hydraulic cylinders
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.
For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong
Safe Seal Technology Co., Ltd. , https://www.jolseals.com