Novice on the brakes do not use toes

Novice on the brakes do not use toes How can we drive the car better and what should we pay attention to when using the car?

Do not use the toe brake

Many novice drivers tend to focus on braking performance, but sometimes braking skills are equally important.

Many novices are accustomed to lightly hitting the brakes with their toes and may not be able to stop the car immediately in an emergency.

To use the toe brake is not as fast as using the soles of the foot, and the entire brake pedal can be stepped on at once to exert the maximum braking ability.

Wax the rear view mirror to prevent waxing in the summer or sudden heavy rain. When the rain is clear, the clarity of the rearview mirror is related to the safety of driving. In case of emergency, and the driving time is not long, you can give the rear view of the car. The mirror coating of detergent, soapy water, shampoo, and a layer of car wax, these simple methods can temporarily solve the problems of the rearview mirror, and in the heavy rain, the mirror can be kept clear within 1 to 2 hours.

Change brake fluid regularly

Many car owners may not notice the brake fluid. In this case, it is recommended that all vehicle owners should regularly check the fluid level of the brake fluid. This is also very simple. The liquid level should only be between "MIX" and "MAX". Some owners feel that the brake fluid has not turned black, and the brakes do not feel 'soft' and there is no need to replace the brake fluid. In fact, this idea is very dangerous. Because the brake failure caused by the brake oil boiling is basically no warning, the brake failure is sudden.

Air filter should be replaced regularly

If the air filter element is not regularly replaced, the filter element is severely clogged, increasing the intake resistance and decreasing the engine power. At the same time, due to the increase in air resistance, the amount of gasoline that is sucked in will also increase, resulting in too high a mixture ratio, which will degrade the engine's operating state, increase fuel consumption, and tend to produce coke. Therefore, you should always develop the habit of checking the air filter element.

Foam Cutting Machine

Computerized horizontal cutting machine is mostly used for shearing sponge block. Electronic control cutter can
hold up and down, sending cutter and platform back and forth. Pressure shaft device
ensures the stability of cutting. Auto shearing and picking up make the operation simple. It
is the best equipment of high quality and efficiency. (Suction is optional)


Manual vertical foam cutting blade is mainly used to cut the large foam into the same length, pieces and slices.
As well as for further process of different specifications of small foam, bidirection cutting can
be choose

Sponge Cutter,Electric Foam Cutter,Pu Foam Cutting Machine,Foam Board Cutting Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com