Multistage Submersible Vertical Centrifugal Pump

Multistage Submersible Vertical Centrifugal Pump
 

Motors are designed with quality material and unique features to assure years of dependable operation.
NEMA standard flange connector.
Oil-filled motor keeps windings cool, permanently lubricated bearings to provide reliable pump service.
Wateright double-insulated cable entry system prevents capillary action and protects against moisture.
A rubber diaphrage is provided to guard against pressure and volume variations due to thermal expansion of oil inside the motor.
Meet the requirements of Standard IEC34-1 with fully sealed shaft 6 inches NEMA standard flange connector Angular contact bearing installed on the bottom side of motor standing for even more axial loadWith stainless steel shaft, credible mechanical seals Axial load:15,500NWith throw sand bush, reinforced butyl rubber house for press balance device


Specofocation:

Why choose Laurel?
 
 Strong R&D capacity   
 
             1.a professional technician team
 
            2.modernized laboratory equipped with advanced facilities
 
            3.promote new products every year
 
            4. Laurel patent design of key parts and appearance
 
Powerful production capacity
 
        1.5 production base, over 100 employees
 
           2.annual output of 10,0000generator sets and 2 million alternators
 
           3.key parts made by ourselves,such as alternator,engine,mufflers,control pannel,air filter,etc
 
           4.provide OEM service for world-famous generator brand
 
Reliable service
 
       1.professional subsidiary trading company, experienced staff, 35 years export history
 
        2.annual sale volume reached $30 million Multistage Submersible Vertical Centrifugal Pump
 

Motors are designed with quality material and unique features to assure years of dependable operation.
NEMA standard flange connector.
Oil-filled motor keeps windings cool, permanently lubricated bearings to provide reliable pump service.
Wateright double-insulated cable entry system prevents capillary action and protects against moisture.
A rubber diaphrage is provided to guard against pressure and volume variations due to thermal expansion of oil inside the motor.
Meet the requirements of Standard IEC34-1 with fully sealed shaft 6 inches NEMA standard flange connector Angular contact bearing installed on the bottom side of motor standing for even more axial loadWith stainless steel shaft, credible mechanical seals Axial load:15,500NWith throw sand bush, reinforced butyl rubber house for press balance device


Specofocation:

Why choose Laurel?
 
 Strong R&D capacity   
 
             1.a professional technician team
 
            2.modernized laboratory equipped with advanced facilities
 
            3.promote new products every year
 
            4. Laurel patent design of key parts and appearance
 
Powerful production capacity
 
        1.5 production base, over 100 employees
 
           2.annual output of 10,0000generator sets and 2 million alternators
 
           3.key parts made by ourselves,such as alternator,engine,mufflers,control pannel,air filter,etc
 
           4.provide OEM service for world-famous generator brand
 
Reliable service
 
       1.professional subsidiary trading company, experienced staff, 35 years export history
 
        2.annual sale volume reached $30 million

Construction Hoist Steel Structure

Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.

The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.

The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.

The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.

Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sczenghui.com