Methane Proportion Above 35% Gas Biomass Generator

Posted on

Model NO.: HGGM
Start: Electric Start
Cold Style: Water-Cooled
Engine Standard: ISO8528, ISO3046
Alternator Standard: BS5000, VDE0530, NEMA Mg1-32, IEC34, IEC60034, As1
Output: 800kw/1000kw/1600kw
Rated Voltage: 400V, 6300V, 10500V
Gas Source: Gas
Trademark: HONNY POWER
Transport Package: Plastic Film Package, or as Need
Specification: ISO8528
Origin: Donguan, Guangdong, China
HS Code: 8502120000
Model NO.: HGGM
Start: Electric Start
Cold Style: Water-Cooled
Engine Standard: ISO8528, ISO3046
Alternator Standard: BS5000, VDE0530, NEMA Mg1-32, IEC34, IEC60034, As1
Output: 800kw/1000kw/1600kw
Rated Voltage: 400V, 6300V, 10500V
Gas Source: Gas
Trademark: HONNY POWER
Transport Package: Plastic Film Package, or as Need
Specification: ISO8528
Origin: Donguan, Guangdong, China
HS Code: 8502120000
Methane Proportion Above 35% Gas Biomass Generator

Gasification parts we not do

Application & Gas Type:
. Biogas (Landfill Gas, Wastewater Biogas, City Sewage Biogas, Farm Biogas, etc. );
. Natural Gas, Oil Field Gas, Shale Gas;
. Coal Gas
. Distributed Energy System (Combined Heat & Power Plant)


Biogas (Landfill Gas, Wastewater Biogas, City Sewage Biogas, Farm Biogas, etc)
Natural Gas, Oil Field Gas, Shale Gas
Coal Gas
Distributed Energy System (Combined Heat &Power Plant, CHP, CCHP
1. Gas engine with alternator
2. Ignition coil, spark plug, high pressure wires by Germany Heinzmann/Motortech
3. Ignition control module by Germany Heinzmann/Motortech
4. Electronic Governor and Actuator
5. Gas filter, Gas/Air Mixer, Intake air filter
6. Cut off valve, Pressure regulator, Flame arrester
7. Generator control module by UK Deepsea 7320
8. MCCB breaker for below 500kW model
9. Radiator is standard, Start battery and charger

Packaging& Shipping:
1, Plastic film package, depends on Client's requirement.
2, 35days after First Payment, Accept FOB, CIF, EXW, etc
  US Googol Gas Generators
Genset Model   HGGM160 HGGM200 HGGM300 HGGM360 HGGM500 HGGM800 HGGM1200 HGGM1500
Engine Model   RTA780G1 RTA890G1 RTA1120G1 RTA1340G1 JTA2160G1 JTA3240G1 JTA4320G1 JTA5400G1
Speed  rpm 1500 1500 1500 1500 1500 1500 1500 1500
Frequency  Hz 50 50 50 50 50 50 50 50
Generator Output (COP) kW 160  200  300  360  500  800  1200  1500 
Typical  Generator Efficiency    93.5% 94.0% 94.5% 95.0% 95.0% 95.5% 95.8% 96.0%
Power Factor   0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Engine Output  (COP) kW 195  235  348  410  600  890  1315  1708 
BMEP for Continually Output bar 9.36  14.50  14.50  15.30  12.98  11.48  14.20  13.56 
Engine Parameter                  
Configuration   In line Vee Vee Vee Vee Vee Vee Vee
No. of Cylinders   6 8 10 12 8 12 16 20
Displacement  l 12.8 14.6 18.3 21.9 35.4 53.1 70.8 88.5
Bore  mm 128 128 128 128 170 170 170 170
Stroke  mm 166 142 142 142 195 195 195 195
Compression Ratio   121:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1
Piston Speed  m/s 8.3 7.1 7.1 7.1 9.75 9.75 9.75 9.75
Static Speed Droop    ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5%
Number of Flywheel Teeth    160  160  160  160  218  218  218  218 
Flywheel House Size   SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE00-18 SAE00-21 SAE00-21 SAE00-21
System Parameter                  
Lube Oil Specification   API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4
Oil Capacity  l 40 32 40 45 160 180 240 300
Max. Premissiable Oil Temperature  °C 110 110 110 110 110 110 110 110
Oil Pressure Warning  kPa 200  200  200  200  300  300  300  300 
Oil Pressure Shutdown  kPa 160  160  160  160  200  200  200  200 
Coolant Capacity for Engine  l 18 20 21 23 70 100 140 200
Max. Prenissiable Temperature   °C 90 90 90 90 82 82 82 82
Max. Coolant Warning Temperature   °C 95 95 95 95 85 85 85 85
Max. Coolant Shutdown Temperature   °C 105 105 105 105 90 90 90 90
Thermostat Open Temperature  °C 82 71 71 71 71 71 71 71
Flow of Coolant pump  m³/h 19.7 26 26 26 2*43 2*49 2*49 2*60
Max. Intake Restriction  KPa 2 2 2 2 2 2 2 2
Max. Exhaust Temperature °C 580 580 580 580 580 580 580 580
Max. Exhaust Back Pressure Kpa 2 2 2 2 2 2 2 2
Exhaust Flange Diameter  mm 1*125 2*100 2*100 2*100 1*250 1*250 2*250 2*250
Charging Alternator Capacity  A 35 35 35 35 55 55 55 55
Starting Voltage  V 24 24 24 24 24 24 24 24
Thermal Balance                  
Electrical Power kW 160  200  300 360 500  800  1200  1500 
Thermal Output ± 8% kW 164  205  311  378  538  830  1232  1518 
Electrical Efficiency  % 40 40 40 40 40 40.5 40.9 41
Thermal Efficiency  % 41 41 41.5 42 43 42 42 41.5
Total Efficiency % 81 81 81.5 82 83 82.5 82.9 82.5
Genset Dimension                  
Length  mm 3100 3300 3500 3600 4600 5100 6000 6500
Width  mm 1300 1500 1500 1500 2190 2190 2600 2600
Height  mm 1500 1800 1800 1800 2300 2600 2700 2800
Genset Weight kg 2500 3500 3900 4100 7000 9000 13200 17500


Methane Proportion Above 35% Gas Biomass Generator Methane Proportion Above 35% Gas Biomass Generator

Gasification parts we not do

Application & Gas Type:
. Biogas (Landfill Gas, Wastewater Biogas, City Sewage Biogas, Farm Biogas, etc. );
. Natural Gas, Oil Field Gas, Shale Gas;
. Coal Gas
. Distributed Energy System (Combined Heat & Power Plant)


Biogas (Landfill Gas, Wastewater Biogas, City Sewage Biogas, Farm Biogas, etc)
Natural Gas, Oil Field Gas, Shale Gas
Coal Gas
Distributed Energy System (Combined Heat &Power Plant, CHP, CCHP
1. Gas engine with alternator
2. Ignition coil, spark plug, high pressure wires by Germany Heinzmann/Motortech
3. Ignition control module by Germany Heinzmann/Motortech
4. Electronic Governor and Actuator
5. Gas filter, Gas/Air Mixer, Intake air filter
6. Cut off valve, Pressure regulator, Flame arrester
7. Generator control module by UK Deepsea 7320
8. MCCB breaker for below 500kW model
9. Radiator is standard, Start battery and charger

Packaging& Shipping:
1, Plastic film package, depends on Client's requirement.
2, 35days after First Payment, Accept FOB, CIF, EXW, etc
  US Googol Gas Generators
Genset Model   HGGM160 HGGM200 HGGM300 HGGM360 HGGM500 HGGM800 HGGM1200 HGGM1500
Engine Model   RTA780G1 RTA890G1 RTA1120G1 RTA1340G1 JTA2160G1 JTA3240G1 JTA4320G1 JTA5400G1
Speed  rpm 1500 1500 1500 1500 1500 1500 1500 1500
Frequency  Hz 50 50 50 50 50 50 50 50
Generator Output (COP) kW 160  200  300  360  500  800  1200  1500 
Typical  Generator Efficiency    93.5% 94.0% 94.5% 95.0% 95.0% 95.5% 95.8% 96.0%
Power Factor   0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Engine Output  (COP) kW 195  235  348  410  600  890  1315  1708 
BMEP for Continually Output bar 9.36  14.50  14.50  15.30  12.98  11.48  14.20  13.56 
Engine Parameter                  
Configuration   In line Vee Vee Vee Vee Vee Vee Vee
No. of Cylinders   6 8 10 12 8 12 16 20
Displacement  l 12.8 14.6 18.3 21.9 35.4 53.1 70.8 88.5
Bore  mm 128 128 128 128 170 170 170 170
Stroke  mm 166 142 142 142 195 195 195 195
Compression Ratio   121:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1
Piston Speed  m/s 8.3 7.1 7.1 7.1 9.75 9.75 9.75 9.75
Static Speed Droop    ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5% ≤  5%
Number of Flywheel Teeth    160  160  160  160  218  218  218  218 
Flywheel House Size   SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE00-18 SAE00-21 SAE00-21 SAE00-21
System Parameter                  
Lube Oil Specification   API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4 API-CF4
Oil Capacity  l 40 32 40 45 160 180 240 300
Max. Premissiable Oil Temperature  °C 110 110 110 110 110 110 110 110
Oil Pressure Warning  kPa 200  200  200  200  300  300  300  300 
Oil Pressure Shutdown  kPa 160  160  160  160  200  200  200  200 
Coolant Capacity for Engine  l 18 20 21 23 70 100 140 200
Max. Prenissiable Temperature   °C 90 90 90 90 82 82 82 82
Max. Coolant Warning Temperature   °C 95 95 95 95 85 85 85 85
Max. Coolant Shutdown Temperature   °C 105 105 105 105 90 90 90 90
Thermostat Open Temperature  °C 82 71 71 71 71 71 71 71
Flow of Coolant pump  m³/h 19.7 26 26 26 2*43 2*49 2*49 2*60
Max. Intake Restriction  KPa 2 2 2 2 2 2 2 2
Max. Exhaust Temperature °C 580 580 580 580 580 580 580 580
Max. Exhaust Back Pressure Kpa 2 2 2 2 2 2 2 2
Exhaust Flange Diameter  mm 1*125 2*100 2*100 2*100 1*250 1*250 2*250 2*250
Charging Alternator Capacity  A 35 35 35 35 55 55 55 55
Starting Voltage  V 24 24 24 24 24 24 24 24
Thermal Balance                  
Electrical Power kW 160  200  300 360 500  800  1200  1500 
Thermal Output ± 8% kW 164  205  311  378  538  830  1232  1518 
Electrical Efficiency  % 40 40 40 40 40 40.5 40.9 41
Thermal Efficiency  % 41 41 41.5 42 43 42 42 41.5
Total Efficiency % 81 81 81.5 82 83 82.5 82.9 82.5
Genset Dimension                  
Length  mm 3100 3300 3500 3600 4600 5100 6000 6500
Width  mm 1300 1500 1500 1500 2190 2190 2600 2600
Height  mm 1500 1800 1800 1800 2300 2600 2700 2800
Genset Weight kg 2500 3500 3900 4100 7000 9000 13200 17500


Methane Proportion Above 35% Gas Biomass Generator

Silicone Molding

Molded silicone products are usually formed by putting solid silicone raw materials with vulcanizing agents into a high-temperature mold and applying pressure through a vulcanizing machine, and high-temperature sulfur is solidified. The hardness of molded silicone is usually 30°C-70°C. The raw materials are matched with the color paste to adjust the color according to the Pantone color card number. The shape of the mold determines the shape of the molded silicone product. The molded silicone product is the most widely used one in the silicone industry. Mainly used for silicone industrial accessories, buttons, silicone gifts, silicone bracelets, silicone watches, key cases, mobile phone sets, silicone kitchen utensils, silicone mats, ice trays, cake molds, etc.

silicone molding process,the silicone molding,silicone blow molding,silicone molding diy

Sung Precision Mould & Plastic Co., Ltd. , https://www.gdinjectionmolding.com