With 10 HP HR186FA air-cooled diesel engine, Ensure a big flow and self-priming type;Â water pump
♦ Also have 2inch, 3 inch and 4 inch models, just according what you need!
♦ Recoil and Electric start are optional ensure easy start!   water pump
   Â
| WATER PUMP | Model | DP40 | |
| Suction,discharge port diameter[mm(in)] | 100(4') | ||
| Cont.head(m) | 31 | ||
| Self-priming time(s/4m)Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 180 | ||
| Max suction head(m) | 8 | ||
| Cont.capacity(m³/hr) | 96 | ||
| ENGINE | Engine model | HR186F | |
| Speed(rpm) | 3600 | ||
| Fuel consumption(g/kw.h) | 285 | ||
| Type | Single-cylinder,vertical,4-stroke air-cooled diesel engine | ||
Displacement(cc) |
 406 | ||
Bore*stroke(mm) |
 86*70 | ||
Starting system |
Recoil or Electric | ||
| Fuel tank capacity(L) | 5.5 | ||
| STANDARD FEATURES | Oil alert | yes | |
| Connector of infall,Connecto of outfall | yes | ||
| Filter | yes | ||
| Seal ring | yes | ||
| Hoop | yes | ||
| DIMENSIONS | Dimension(L× W× H)(mm) | 645×475×605 | |
| Net weight(kg) | 69 | ||
| 20FT | 99 | ||
Â
Step 1: preparation before working
- Put machine above ground, inject diesel or oil.
- Add 0# (or above) diesel.
- Open the black lid and inject 2-5 liters, run-dry is prohibited
Step 2: adjust switch
- adjust the switch to the center(or below) and tighten(or adjust to the maximum).
Step 3: discharge air in tube
- Air existing in tube due to the first time use, need to discharge air in tube.
 Step 4: Pressure reducing valve
- Press the pressure valve down by hand (musthold the pull plate).
- Pull down plate four times gently and wait for the oil out. Then tighten the connector again.
Step 5: Pull the plate
- (do not use the fingers press the valve) Pull the plate one time gently (the valve will pop up automatically) and put the wire back.
- Re-press the valve and hold the machine bracket, holding the pull-line with both hands and pulling it.
Step 6: close the machine
- Adjust the switch to minimum for closing the machine.
Â
♦ We are professional manufacture of air-cooled diesel engine(3-20HP),diesel water pump(1.5-6Inch), small construction machines and so on.
♦ Morden and beautiful factory of Chongqing, warmly welcome YOU from all over the world have a visit to us!
♦  ISO, CE, GS, ROHS certification for all over the world customer.
Factory:
 2,3,4 inch model agriculture equipment agricultural irrigation diesel water pump
With 10 HP HR186FA air-cooled diesel engine, Ensure a big flow and self-priming type;Â water pump
♦ Also have 2inch, 3 inch and 4 inch models, just according what you need!
♦ Recoil and Electric start are optional ensure easy start!   water pump
   Â
| WATER PUMP | Model | DP40 | |
| Suction,discharge port diameter[mm(in)] | 100(4') | ||
| Cont.head(m) | 31 | ||
| Self-priming time(s/4m)Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 180 | ||
| Max suction head(m) | 8 | ||
| Cont.capacity(m³/hr) | 96 | ||
| ENGINE | Engine model | HR186F | |
| Speed(rpm) | 3600 | ||
| Fuel consumption(g/kw.h) | 285 | ||
| Type | Single-cylinder,vertical,4-stroke air-cooled diesel engine | ||
Displacement(cc) |
 406 | ||
Bore*stroke(mm) |
 86*70 | ||
Starting system |
Recoil or Electric | ||
| Fuel tank capacity(L) | 5.5 | ||
| STANDARD FEATURES | Oil alert | yes | |
| Connector of infall,Connecto of outfall | yes | ||
| Filter | yes | ||
| Seal ring | yes | ||
| Hoop | yes | ||
| DIMENSIONS | Dimension(L× W× H)(mm) | 645×475×605 | |
| Net weight(kg) | 69 | ||
| 20FT | 99 | ||
Â
Step 1: preparation before working
- Put machine above ground, inject diesel or oil.
- Add 0# (or above) diesel.
- Open the black lid and inject 2-5 liters, run-dry is prohibited
Step 2: adjust switch
- adjust the switch to the center(or below) and tighten(or adjust to the maximum).
Step 3: discharge air in tube
- Air existing in tube due to the first time use, need to discharge air in tube.
 Step 4: Pressure reducing valve
- Press the pressure valve down by hand (musthold the pull plate).
- Pull down plate four times gently and wait for the oil out. Then tighten the connector again.
Step 5: Pull the plate
- (do not use the fingers press the valve) Pull the plate one time gently (the valve will pop up automatically) and put the wire back.
- Re-press the valve and hold the machine bracket, holding the pull-line with both hands and pulling it.
Step 6: close the machine
- Adjust the switch to minimum for closing the machine.
Â
♦ We are professional manufacture of air-cooled diesel engine(3-20HP),diesel water pump(1.5-6Inch), small construction machines and so on.
♦ Morden and beautiful factory of Chongqing, warmly welcome YOU from all over the world have a visit to us!
♦  ISO, CE, GS, ROHS certification for all over the world customer.
Factory:Â
- Specification:
- 1. Out diameter: 406.4mm - 1422.4mm (16"-56")
- 2. Thickness: 9.5mm-38.1mm
- 3. Length: 6m-12.5m
- 4. Type: LSAW (Longitudinal Submerged-Arc Welded), DSAW (Double Submerged-arc welded) Steel Pipe
- 5. Manufacturing Process:JCO(JCOE,COE)
- 6. Standard: API SPEC 5L (ISO 3183), GB/T 9711.1, GB/T 9711.2, GB/T 9711.3 BSEN10217
- 7. Uses: for conveying gas, water and oil, in the oil or natural gas industries
- 8. Chemical Analysis (%):
-
Standard Type of pipe Class Grade C max Si max Mn max P max S max V max Nb max Ti max API SPEC 5L
/ISO 3183WELD PSL1 L245 B 0.26 - 1.2 - 0.03 0.03 - - L290/X42 0.26 - 1.3 - 0.03 0.03 - - L320/X46 0.26 - 1.4 - 0.03 0.03 - - L360/X52 0.26 - 1.4 - 0.03 0.03 - - L390/X56 0.26 - 1.4 - 0.03 0.03 - - L415/X60 0.26 - 1.4 - 0.03 0.03 - - L450/X65 0.26 - 1.4 - 0.03 0.03 - - L485/X70 0.26 - 1.4 - 0.03 0.03 - - PSL2 L245M/GR.BM 0.22 0.45 1.2 0.025 0.015 0.05 0.05 0.04 L290M/X42M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 L320M/X46M 0.22 0.45 1.3 0.025 0.015 0.05 0.05 0.04 L360M/X52M 0.22 0.45 1.4 0.025 0.015 - - - L390M/X56M 0.22 0.45 1.4 0.025 0.015 - - - L415M/X60M 0.12 0.45 1.6 0.025 0.015 - - - L450M/X65M 0.12 0.45 1.6 0.025 0.015 - - - L485M/X70M 0.12 0.45 1.7 0.025 0.015 - - - L555M/X80M 0.12 0.45 1.85 0.025 0.015 - - - - 9. Mechanical Properties
-
Standard Class Grade Yield Strength (MPa) Tensile Strength (MPa) Elongation(%) Y.S/T.S API SPEC 5L
/ISO 3183PSL1 L245 B min 245 415 b - L290/X42 min 290 415 b - L320/X46 min 320 435 b - L360/X52 min 360 460 b - L390/X56 min 390 490 b - L415/X60 min 415 520 b - L450/X65 min 450 535 b - L485/X70 min 480 470 b - PSL2 L245N/BN
L245M/BMmin 245 415 b - max 450 760 b 0.93 L290N/X42N
L290M/X42Mmin 290 415 b - max 495 760 b 0.93 L320N/X46N
L320M/X46Mmin 320 435 b - max 525 760 b 0.93 L360N/X52N
L360M/X52Mmin 360 460 b - max 530 760 b 0.93 L390N/X56N
L390M/X56Mmin 390 490 b - max 545 760 b 0.93 L415N/X60N
L415M/X60Mmin 415 520 b - max 565 760 b 0.93 L450M/X65M min 450 535 b - max 600 760 b 0.93 L485M/X70M min 485 570 b - max 635 760 b 0.93 L555M/X80M min 555 625 b - max 705 825 b 0.93
LSAW Steel Pipe,LSAW Steel Tube,LSAW L360 Steel Pipe ,LSAW L485 Steel Pipe
He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com