Applications & Installation
This series centrifugal pumps are with double back-to-back impellers to gain energy. They are suitable for both domestic and industrial applications to pump clean liquids and non-aggressive chemical fluids. Particularly be used for pressure boosting washing systems, feeding boilers, cooling and fire-fighting units ,chiller and refrigeration systems. Â
.
Performance
Â
| TYPE | Output | Power | Current | Capacitor | H.max | Q.max | Size | S.Head | N.W | Package Dimention |
| Kw | HP | (A) | (uF) | (m) | (L/min) | (inch) | (m) | (kg) | L×W×H(mm) | |
| SCM2-55 | 1.5 | 2 | 10 | 30 | 48 | 120 | 1.25"*1" | 8 | 31 | 470×290×610 |
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C
Motor
★Two-pole induction motorÂ
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.
Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: BrassÂ
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide
Notes
Pumps should be installed in a dry and covered area, protected against the weather.
 AUTOSCM2-55 TWIN IMPELLER CENTRIFUGAL WATER PUMPS
Applications & Installation
This series centrifugal pumps are with double back-to-back impellers to gain energy. They are suitable for both domestic and industrial applications to pump clean liquids and non-aggressive chemical fluids. Particularly be used for pressure boosting washing systems, feeding boilers, cooling and fire-fighting units ,chiller and refrigeration systems. Â
.
Performance
Â
| TYPE | Output | Power | Current | Capacitor | H.max | Q.max | Size | S.Head | N.W | Package Dimention |
| Kw | HP | (A) | (uF) | (m) | (L/min) | (inch) | (m) | (kg) | L×W×H(mm) | |
| SCM2-55 | 1.5 | 2 | 10 | 30 | 48 | 120 | 1.25"*1" | 8 | 31 | 470×290×610 |
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C
Motor
★Two-pole induction motorÂ
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.
Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: BrassÂ
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide
Notes
Pumps should be installed in a dry and covered area, protected against the weather.
Â
A Heat Exchanger Unit is a device used to transfer thermal energy (heat) between two or more fluids. Heat exchangers are used in a wide variety of applications, such as heating and cooling of buildings, industrial processes, and power generation.
The heat exchanger unit essentially consists of heat exchangers such as Plate Heat Exchanger, Shell and Plate Heat Exchanger, or other counterpart, a circulating pump, a fluid make-up pump, thermometers, a filter, sensors, a pipeline and valves. It is also possible to design a temperature control system, pressure stabilization system, variable-frequency controller, heat metering and communication controller, etc. according to the client`s requirements.
Big advantage of heat exchanger unit is that, by adopting a modularized structure, it maximizes each component`s function to the most. The precise control for heat exchange process also saves time and efforts for maintenance and installation.
Feature is that intelligent control, excellently energy-saving, high automation and easy to operate, high cost performance and wide application.
Heat Exchanger Unit,Heat Exchanger Ac Unit,Heat Exchanger Package Unit,Heat Recovery Ventilation Unit
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com