The Nanjing Automobile MG MG has recently been continuously reporting news, and one of the most central topics is the possibility of cooperation with SAIC.
Four years ago, SAIC had intentionally integrated SAIC Motor in the Yangtze River Delta. Four years later, SAIC once again initiated the negotiations for the collection of Nanjing Automobile. The difference is that this time the name is to integrate the resources of the Grandeur Roewe. Moreover, under the promotion of the SASAC, SAIC and Nanjing Steam have already contacted and exchanged opinions, but there has been no substantial progress. At the same time, Nanjing Automobile stated that apart from SAIC, Dongfeng, Jianghuai, and Chery had all been looking for a cooperation project on the MG project.
Nanjing Automobile, which has not been known for a long time, relies on what attracts the attention of so many companies.
SAIC wants to break the predicament through cooperation
Among so many companies, SAIC and NAC have been the most talked about. As for the possible cooperation between SAIC and Nanjing Auto, the relevant person put forward a speculation that SAIC Motor wants to integrate the Roewe Project and the MG project, especially the MG's engine technology and production line. But does MG's engine really make SAIC so embarrassing?
“We currently produce in-line 4-cylinder and parallel 6-cylinder, which is the leading engine in China.†Yang Junhu, general manager of Nanjing Automobile MG Sales Co., Ltd., proudly stated that MG's engine technology is at the leading level in China. Although SAIC Motor also introduced the engine technology of the Rover platform, the Eric III V6 engine from the global power system supplier PTL (formerly MG-Rover Group engine supplier). In other words, Roewe's engine can compete with MG. The reason why SAIC Motor will rush to negotiate with Nanjing Automobile Co., Ltd. The problem also happens to be on the engine.
It is understood that the Shanghai Lingang production base planned by SAIC Roewe has not been approved by the National Development and Reform Commission as scheduled, and the engine plant of Baoshan has so far only produced 10,000 units. From the market feedback, from the listing of Roewe in March, the car has sold a total of 5316 cars, with an average monthly sales of less than 2,000 cars, and in the case of such a small volume of sales, consumers still do not buy a car to mention To the car. Roewe's production capacity has not kept pace with market demand. Many industry insiders predict that SAIC Roewe has encountered difficulties in engine production and R&D. To find a breakthrough for this is the reason why SAIC is anxious to cooperate with Nanjing Auto.
The engine into the important weight of NAC
In addition to SAIC, other independent brands have also submitted cooperation intentions to Nanjing Automobile. It is understood that MG's conservative goal for the vehicle is to accumulatively sell 200,000 vehicles over a five-year period, while the engine's annual production capacity is as high as 250,000 units. At the same time, MG MG, which has inherited MG Rover technology, can produce a total of 15 passenger car engines of different specifications ranging from 1.1 liters to 2.5 liters of gasoline and 2.0 liters of diesel fuel. In addition to supplying MG models, they can also be exported. Industry analysts said that the export of the engine is bound to be an important part of MG's profit growth. Jia Xinguang, a well-known expert in the automotive industry, said that if Nanjing Automobile produces a small amount of whole vehicles and produces a large number of MG engines, the capital shortage will also be alleviated after the operation is successful.
At the same time, the relevant person in charge of Nanjing Automobile's MG has revealed that Nanjing MG is looking for partners in China, but this cooperation is not at the group level but at the project level. The enterprises that have negotiated with Nanjing Automobile include Chery, FAW, SAIC, JAC, Geely Automobile, and Dongfeng Automobile. "They are all taking advantage of our powertrain."
Plush toys general customization process
1, the customer needs to provide customized product pictures or design draft (with real samples can be directly provided with real samples), and indicate the size of specifications, material requirements, stuffing, do the quantity of goods, etc. For our reference.
2, according to the information provided by the customer, our printer preliminarily calculated the product price (in the case of no sample, all prices are estimated).
3, after consultation and customer confirmation, start to apply for proofing. The proofing fee depends on the product and can be refunded after the customer confirms the order to start production. If this product is confirmed to be free, it will not be returned; Samples can be modified for free 2 times, and the proofing cycle is normally 7 working days.
4, the sample sent to the customer, the two sides to determine the final sample, signed a purchase and sales contract. The factory of conventional products starts production after receiving 30% deposit of the total payment, the balance is paid off one working day before delivery, and the payment is delivered.
5, the factory according to customer requirements, choose the right way to ship.
Throw Pillow
Cartoon Toy
Plush Animal Toys
Plush Doll
Cartoon Toy
U-shaped Pillow
Pendant
Plush Animal Toys,Plush Hippo Toys,Cute Plush Hippo Toys,Plush Hippo Children'S Toys
Shenzhen Yida Toys Co. , Ltd. , https://www.ydatoy.com