The "Compact Tester for Small-sized Batteries and Chargers" was invented by Prof. Fang Guozhi, the director of the Harbin Institute of Technology's Electronic Education and Training Center, and his student Zhao Yunzhi. It is an intelligent automatic test equipment designed and manufactured for the detection of mobile phone lithium-ion rechargeable batteries and mobile phone chargers currently on the market.
Yang Chao, a graduate student of Harbin Institute of Technology who participated in the instrument testing work, said that 30 mobile phone batteries were randomly purchased on the market. After testing the device, two of the batteries were not available and they could not be used for charging.
Gate Valve , one of the most widely applied valves, is a valve that opens by lifting a gate/wedge out of the path of the fluid. The gate faces of gate valve could be a wedge shape or be parallel. Gate valves are not suitable for regulating flow, having been designed to be fully opened or closed. When fully open, the gate valve has no obstruction in the flow path, resulting in very high flow coefficient.
Gate valves have either a rising stem or a non-rising stem. Rising stem provide a visual indication of valve position. Non-rising stem is used where vertical space is limited or underground.
|
|
|
| API Gate Valve | Pressure Seal Gate Valve | Forged Steel Gate Valve |
Kolink gate valves are supplied with three basic type of body-bonnet closures: bolted bonnet, welded bonnet and pressure seal bonnet. Bolted bonnet, the seal depends on the body-bonnet bolt preload to maintain sufficient compressive force, bolted bonnet is widely used for valves on various pressure ratings and sizes. Welded bonnet is mainly applied for small-size forged steel gate valves, suitable for applications requiring zero leakage on body-bonnet joint when carrying hazardous system fluids. Pressure seal bonnet is adopted for valves for high pressure service, typically in excess of 15 MPa (2250 psi). The body-bonnet joint seals improves as the internal pressure in the valve increases, compared to other constructions where the increase in internal pressure tends to create leaks in the body-bonnet joint.
Kolink gate valves are with flanged ends, butt weld ends, socket weld ends and screwed ends, and are constructed with various materials of cast carbon steel, stainless steel, alloy steels, and forged steels.
Various combinations of seating and stem materials are available to meet specific customer requirements.
The Cross-section of a Typical Cast Steel Gate Valve:
1) Austenitic ductile iron stem nut provides resistance to wear and heat.
2) Rising stem with precision trapezoidal threads for long-lasting service.
3) Two piece self-aligning Gland Bushing and Gland flange prevent stem damage.
4) Spacer rings and double packing sets available upon request.
5) Machined backseat designed to relieve back pressure on the stem packing when fully seated. Replacing stem packing under pressure is not recommended.
6) Renewable welded-in or screwed-in seats provide a bubble tight joint.
7) Wedge disc fully guided and precision fitted to ensure tight sealing performance.
8) Flexible wedge compensates for seat face distortion and body deformation due to pipe stress.
Gate Valve
Cast Steel Gate Valve, Forged Steel Gate Valve, Slab Gate Valve, Wedge Gate Valve Supplier, Knife Gate Valve
Wenzhou Kolink Valve Co., Ltd. , http://www.kolinkvalves.com