1. How to solve the problem that no water is added to the still after the Kjeldahl nitrogen analyzer is turned on?
Answer: Check whether the distilled water bucket is leaking after half a minute after starting the machine. It is normal that it can be filled with gas; check whether the water level in the distilled water bucket exceeds one third and is not enough to make up; check the position of the distilled water bucket is lower than the table where the instrument is placed. If the pressure is not enough, no water can be added; check if the inlet and liquid pipes of the distilled water bucket are connected incorrectly, there will be bubbles and noises in the wrong bucket; check the drain valve, it should be closed.
2. When the instrument is working, smoke-like gas emerges from the top, what's the matter?
Answer: Check whether the faucet for the cooling water inlet is open. The cooling water is closed or the water volume is small, which will cause the steam from the digestive tube to not be condensed. The steam emerging from the machine looks like smoke.
3. What should I do if the white tube in the digestive tube is sucked back during use?
Answer: The Kjeldahl nitrogen analyzer stops working (the distiller stops heating), and the gas valve fails to close in time, which will cause suction. Some small holes can be pierced in the white tube. If the valve is damaged, it cannot be closed, and it will suck back.
4. There will be a sound every 3-5 seconds during work, is it normal?
Answer: This kind of sound is a normal phenomenon. When the Kjeldahl nitrogen analyzer is working, the distiller will continue to heat to produce water vapor and consume water. The instrument will automatically open the water valve to replenish water. The sound is the sound of the water valve opening and closing. normal phenomenon. Note: â‘ Before using the instrument each time, let the instrument boil once to clean the internal pipeline of the instrument; â‘¡After using the instrument, open the lid of one of the barrels to exhaust the gas in the barrel to extend the use of accessories life.
MSG produces enclosures for various types of device, machines, equipment. They`re mostly used in electronics and industrial industry.
Enclosures are usually custom designed in specific dimension, material, and color to suit different purposes. The commonly used material includes, aluminum, plastic, stainless steel, brass alloy etc. Their manufacture techniques include CNC laser cutting, press brakes, welding, stamping, powder coating etc.
If you`re looking for a company with capabilities of producing metal equipment enclosure with high level of accuracy, please contact us. We`re always ready to help!
Sheet Metal Fabrication, Steel Cabinet, Metal Enclosure
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.hardwarehuiye.com