Fast Dry Non-Flammable Electrical Contact Cleaner, Solvent Degreaser, Solvent Cleaner

Posted on

  • Model NO.: TE-8065
  • Cleaning Media: Dry Cleaning
  • Cleaning Precision: Ultra-Precision Industrial Cleaning
  • Condition: New
  • Volume: 400ml
  • Validity: Three Years
  • Specification: CE, RoHS, SGS, GMP
  • Application: Keyboard, Circuit Board, Computer, Home Care
  • Automation: Automatic
  • Principle: Chemical Cleaning
  • Feature: Clean Thoroughly
  • Package: 12PCS/CTN
  • Trademark: TEKORO
  • Origin: Guangdong, China
TEKORO Electronic Contact Cleaner is a residual-free formulation that quickly dissolve and removes oil,grease ,flux,condensation and other contaminants from delicate electronic circuitry ,It is safe to use on a wide variety of plastics and prevents degradation of electrical signals,For use on Computers,circuit Boards,HI-FI,Switches ,Precision Instruments and more.
Precautions:Extremely Flammable!!Contains Heptane ,Toluene and Carbon Dioxide ,Pressurized
Container .keep away from direct sunlight and do not expose to temperatures ,exceeding 50C Do
not puncture or burn even after use.Do not spray close to or onto a naked flame or any incandescent material.No smoking near the spray ,Avoid inhaling or breathing fumes or vapor and avoid spraying directly onto eyes .keep away from sources of ignition ,flames and sparks, Avoid the accumulation of electrostatic charges ,Use in well ventilated area.
 
TEKORO Electronic Contact Cleaner es una formulación de residual libre que se disuelve y elimina el aceite, la grasa, el flujo, la condensación y otros contaminantes de delicado circuito electrónico rápidamente, es seguro de usar en una amplia variedad de plásticos y previene la degradación de las señales eléctricas, para el uso en equipos, tarjetas de circuitos, HI-FI, Interruptores, instrumentos de precisión y más. Precauciones: Extremadamente inflamable !! Contiene heptano, tolueno y dióxido de carbono, a presión Container .keep lejos de la luz solar directa y no lo exponga a temperaturas, superior a 50C Do No perforar ni quemar, incluso después de use.Do No rocíe cerca o sobre una llama o un cuerpo incandescente material.No fumar cerca de la pulverización, evitar la inhalación o humos o vapores al respirar y evitar rociar directamente sobre los ojos .keep lejos de fuentes de ignición, llamas y chispas, evitar la acumulación de cargas electrostáticas, utilice en áreas bien ventiladas.

WHY CHÖOSE ÜS  
1.Guaranteeing quality 
2.Focusing on fine chemical market and requirements many years.
3.Certificates of ISO9001, ROHS, TUV, ASTM,REACH, etc.
4.Production capability more than 6 million pcs/cartridge per month
5.Exported to more than 50 countries and regions;
6.100% inspection before exporting and 100% after sales service following.
7.On going creation and innovation can go beyond.
 
 
FAQ:
Q1:Can you print our logos?
Yes,customized logos can be print on the products according to your requirements.
Q2:Is that factory price?
Yes,we assure you all prices are based on factory.
Q3: What is your delivery date ?
Within 30 days once we confirm the packing artwork .
Q4:What documents are available?
A full range documents including commercial invoice, packing list, Bill of Loading Original, MSDS and relative certificates can be provided. 
 
 
CONTACT:
We will reply your email or fax within 24 hours . 
You can call us any time if there is any questions on our products. 
 
TEKORO'S WORD, WORD' TEKORO

TUBING

Tubing is mainly used to provide oil and gas flow passage during production of oil and gas wells. For flowing wells, due to the large inner diameter of the CASING, the casing is directly used for production. Due to the density difference, pressure drop and expansion, the liquid flows up rapidly, causing the liquid to slip, resulting in the ineffective utilization of the downhole elastic energy. Running tubing with smaller OD and ID during production can effectively solve the above problems by allowing fluid to flow in the tubing. Therefore, running tubing is required during production of flowing wells. The downhole operation and production of flowing well and non flowing well can be completed by using various tools for tubing running.


The basic requirements of the tubing used for workover are: to comply with the safety and economic principles, to meet the technical requirements adopted during well completion, and to meet the requirements for corrosion resistance and operation measures after the well is put into production.


According to the manufacturing process, oil pipes can be divided into seamless pipes and electric welded pipes. Seamless pipe is a kind of forged steel pipe without welding seam, which is made of hot working steel. After pressing, stretching, heat treatment and other processes, it reaches the standard size of oil pipe, forming a seamless oil pipe series. Electric welding pipe is a kind of pipe with a longitudinal weld formed by resistance welding or electric induction welding without filler metal. The welding edges are squeezed together by mechanical pressure, and the standard size oil pipes are reached through heat treatment and other processes, forming a series of electric welding pipes.


Tubing,Api 5Ct Tubing,Api Tubing,Seamless Api 5Ct

ESASTSUN OILFIELD EQUIPMENT MANUFACTURING (CAMBODIA) CO., LTD , https://www.eastsuncambodia.com