The heaters are explosion-proof heaters designed and manufactured according to standard components . They are used in hazardous environments and have the following explosion-proof certificates.
To select the right heater, you need to know the following questions :
Conduction: Conductive heaters use less energy than convection heaters with heat sinks. Heat transfer through metal is much more efficient than through air. Because the air inside the incubator surrounds the measuring instrument, air is a good thermal insulator. In order to facilitate heat transfer, the surface of the conductive heater is flat, and therefore it is required that the heated device part also has a flat surface for mounting the fixed heater.
Convection: The air in the protection box acts as a heat transfer medium from the heater to the heated instrument.
Advantages : Renke shaped devices ( regular or irregular ) can be heated.
Disadvantages : The protection box must be fully insulated so that the heat loss is reduced. The primary factor is the seal of the protective box.
Heat Loss Calculation Formula Maid Under IN Protection of ERTEC Protection Box ): Household = Thermal Conductivity x 1m Degree Difference = K' delta Th
When calculating the required heating power, the K value has retained a safety factor of 20 % . As much as possible is not suitable for explosion-proof heaters. A thermostat must be used to control the electric heater to prevent the heater from getting too hot and close to the melting temperature.
The original article copyright belongs to Yang Zhonghua Mao Electric Co., Ltd. All rights reserved. Please indicate the source:
This catagory includes outside door handle, inside door handle and tailgate handle for Hyundai Accent, Elantra, Verna, IX35, Sonata, Tucson,Tiburon, Azera, Santa Fe, Veracruz, Starex, H100 and etc.
Exterior car door handles is uesd to access your car`s cabin. Types of exterior car door handle are pull up, pull out, and trigger.
Interior car door handles is a small lever that you pull to release the door`s hook from the vehicle frame`s latch. There are different forms of inside door handles, though the area where it`s mounted remains consistent with most types of vehicles.
The tailgate handle is an external component that triggers the latch mechanism and allows the tailgates to swing open.
Most handles are made of plastic, while some are metal, such as zinc alloy. Further, there are designs offering a mix of both like a plastic bezel and metal lever, or vice versa.
For the car door handle surface finish, there are tons of them available. The list includes the usual chrome-plated, primed, smooth or textured, chrome bezel and colored lever combination, paint to match, satin chrome, and polished.
Car Door Handle For Hyundai,Hyundai Car Door Handle Replacement,Hyundai Car Door Handle Repair,Hyundai Car Door Handle Accessoires
Zhejiang Xingting Auto Parts Co., Ltd , https://www.xingtingautoparts.com