Before running:
1. Is the program consistent with the workpiece?
2. Tool magazine, whether the tool in the tool table is consistent with the tool information in the program 3. Check the integrity of the tool
4. Program syntax check, define the necessary G code, M code
5. Perform simulation processing to check the correctness of the program
6. Determine that the workpiece coordinate system matches the program coordinate system
7. Finally determine the machine status and each switch position (feedrate override switch should be 0).
1. Observe that the machine action and feed direction are consistent with the program.
2. When the workpiece coordinate, tool position and remaining amount match, the feedrate override switch can be gradually increased.
3. Determine whether the cutting, sound, and machine vibration conditions are normal.
4. After the recovery process, it should be slowly fed to the original machining position, and then gradually returned to the normal cutting rate abnormal treatment:
5 When the machine is stopped due to an alarm, the alarm information should be cleared first, and the spindle should be safely removed from the machining position to determine the alarm failure and resume machining.
6. Before the process needs to be paused, the override switch should be slowly turned off to 0. 3. When an emergency occurs, stop the program quickly and use the emergency stop button if necessary.
(Finish)As the name implies, Round Molded Graphiteis a cylindrical product of graphite electrode, which is made of graphite block materials by crushing, screening, batching, shaping, cooling, roasting, dipping and graphitization of post section petroleum coke and medium temperature coal tar pitch. It has the advantages of high temperature resistance, corrosion resistance, good conductivity and light weight. It is mainly used for large DC resistance furnaces, blast furnace bricks, conductive electrodes, lining anti-corrosion and other purposes.
The high-purity graphite, graphite block and Molded Graphite produced by Pingdingshan Carbon Graphite Factory for many years are excellent, and the specifications of Round Molded Graphite are as follows: φ 450*800, φ 520*400 φ 630*420, φ 660*620 φ 780*600, φ 820*350~500 φ 900*350~400, φ 1050*350~400 φ 980~350*400, φ 1160*350~680 φ 1260*350~680, φ 1330*400 φ 1420*400, φ 1520*400 φ 1630*350, φ 1800*350 φ 2000*350, φ 520~2000*680
Round Rod Graphite,Graphite Round Stock,Round Molded Graphite,Graphite Round Square Shape
Henan Carbon Road New Material Technology Co., Ltd , https://www.kygraphiteblock.com