Model NO.: WT series
Machine Type: waste water recirculating treatment system
Warranty: 12 Months
Voltage: 380V/50Hz 3phase or customized
Dissolved air pump: Grundfos/Denmark
Filter recoil pump: rundfos/Denmark
Trademark: Mooge Tech
Transport Package: Standard Pack Waste Water Recirculating Treatment
Specification: 5 ton/hr -20 ton/hr treatment capacity
Origin: Jiangsu, China
HS Code: 8477800000
Model NO.: WT series
Machine Type: waste water recirculating treatment system
Warranty: 12 Months
Voltage: 380V/50Hz 3phase or customized
Dissolved air pump: Grundfos/Denmark
Filter recoil pump: rundfos/Denmark
Trademark: Mooge Tech
Transport Package: Standard Pack Waste Water Recirculating Treatment
Specification: 5 ton/hr -20 ton/hr treatment capacity
Origin: Jiangsu, China
HS Code: 8477800000
                                 Waste water recirculating treatment system* Description
* In factories, the plastic recycling line process waste plastic material will drain out large amount of waste water every day. On one hand, the waste water comes out from the recycling line contains lots of COD, SS and other particles pollutant and the PH is too high that not permitted to drain out directly. On the other hand, fresh water resource is very scarce and valuable in some region.
* This waste water recirculating treatment system is mainly designed to treat the waste water from the waste plastic recycling washing line. With the flocculation and filtration method, sewage after treated turns into clean water that with no obvious turbidity able to drain out without pollution or for recirculating use.
* In this way, we can both save the water consumption and protect our environment.
*Â Working Flow:
Sewage from Washing Line ------ Filter Screen ------ Waste Water Adjusting Tank
                                                       |
Chemical Feeding --------------- Metric Pump --------------- Reaction Tank
                                                       |
Dissolved Gas System ---------------------------------------- Air Flotation Tank ------------------
                                                       |                     |
                                              Water Separation Tank      Sludge Tank
                                                       |                     |
                                                Sand Filter Tower     Plate and Frame Press Filter
                                                       |                     |
                                              Carbon Filter Tower   Dry Sludge can be carried away
                                                       |
                                       Discharging After Reaching Standard
 Â
* Technical information
| S/N | Item | Requirement |
| 1 | Capacity: | 5-20m³ Per Hour |
| 2 | Raw material: | Waste water from the Plastic washing plant |
| 3 | Final Products: | Clean water able to drain out without pollution |
| 4 | Labor request: | 2-3 Person/shift |
| 5 | Chemical Use | HÂ2SOÂ4 + PAC + PAM |
| 6 | Environment required: | Indoor with Altitude < 1000m Temperature: -15°-40° Relative humidity< 90% |
| 7 | Buyer supply | Waste water adjusting tank underground with air bubble system Air supplying with pressure 0.7-0.8 MPa Main Electricity connection cables Treatment Chemicals |
* Features:
1. The whole system is with reasonable design and arrangement, low power consumption
2. High quality of electric device and instrument, with reliable protection function
3. Simple operation with less labor and stable working performance, easy to maintain
4. Save the water consumption for the recycling line
*Â Transportation and Packing
• For the loose cargo we will packing by wooden box.
• For the full container loading we are packing the machine by film and some on pallet accordingly.
• We can ship the goods by air or by sea.
• We will send pictures of cargo loading to our client to check and keep recording.
• We can send cargo to client's warehouse to loading.
*Â Our service:
• Pre-sale: we give our client the detailed technician offer, sign the sales contract etc.
• In-sales: we supply the details layout, installation instruction, and technician support for the clients.
• After sales: we arrange engineer to install the machine and train the workers for our client.
• We have 24 hours service line to solve the after sales problem.
• We have free spare parts with the machine.
• We supply long term spare parts for every customer.
• We always update the new technology to every customer.
*Â In order to match your requirement and provide you a proper quotation, please Let us know:
• What is the treating capacity(Ton/Hr) do you need?
• What is the voltage and frequency you need?
• Do you have any requirement for the occupied area?
• Other special requirements about the waste water recirculating treatment system you want.
*Â MOOGE TECH is a professional machine manufacturer with more than 10 years' experience. Our developing concept is quality first, service foremost, and we are looking forward to cooperating with you for a bright future.Â
* If you have any questions about our waste water recirculating treatment system, pls do not hesitate to contact me at any time!                                  Waste water recirculating treatment system
* Description
* In factories, the plastic recycling line process waste plastic material will drain out large amount of waste water every day. On one hand, the waste water comes out from the recycling line contains lots of COD, SS and other particles pollutant and the PH is too high that not permitted to drain out directly. On the other hand, fresh water resource is very scarce and valuable in some region.
* This waste water recirculating treatment system is mainly designed to treat the waste water from the waste plastic recycling washing line. With the flocculation and filtration method, sewage after treated turns into clean water that with no obvious turbidity able to drain out without pollution or for recirculating use.
* In this way, we can both save the water consumption and protect our environment.
*Â Working Flow:
Sewage from Washing Line ------ Filter Screen ------ Waste Water Adjusting Tank
                                                       |
Chemical Feeding --------------- Metric Pump --------------- Reaction Tank
                                                       |
Dissolved Gas System ---------------------------------------- Air Flotation Tank ------------------
                                                       |                     |
                                              Water Separation Tank      Sludge Tank
                                                       |                     |
                                                Sand Filter Tower     Plate and Frame Press Filter
                                                       |                     |
                                              Carbon Filter Tower   Dry Sludge can be carried away
                                                       |
                                       Discharging After Reaching Standard
 Â
* Technical information
| S/N | Item | Requirement |
| 1 | Capacity: | 5-20m³ Per Hour |
| 2 | Raw material: | Waste water from the Plastic washing plant |
| 3 | Final Products: | Clean water able to drain out without pollution |
| 4 | Labor request: | 2-3 Person/shift |
| 5 | Chemical Use | HÂ2SOÂ4 + PAC + PAM |
| 6 | Environment required: | Indoor with Altitude < 1000m Temperature: -15°-40° Relative humidity< 90% |
| 7 | Buyer supply | Waste water adjusting tank underground with air bubble system Air supplying with pressure 0.7-0.8 MPa Main Electricity connection cables Treatment Chemicals |
* Features:
1. The whole system is with reasonable design and arrangement, low power consumption
2. High quality of electric device and instrument, with reliable protection function
3. Simple operation with less labor and stable working performance, easy to maintain
4. Save the water consumption for the recycling line
*Â Transportation and Packing
• For the loose cargo we will packing by wooden box.
• For the full container loading we are packing the machine by film and some on pallet accordingly.
• We can ship the goods by air or by sea.
• We will send pictures of cargo loading to our client to check and keep recording.
• We can send cargo to client's warehouse to loading.
*Â Our service:
• Pre-sale: we give our client the detailed technician offer, sign the sales contract etc.
• In-sales: we supply the details layout, installation instruction, and technician support for the clients.
• After sales: we arrange engineer to install the machine and train the workers for our client.
• We have 24 hours service line to solve the after sales problem.
• We have free spare parts with the machine.
• We supply long term spare parts for every customer.
• We always update the new technology to every customer.
*Â In order to match your requirement and provide you a proper quotation, please Let us know:
• What is the treating capacity(Ton/Hr) do you need?
• What is the voltage and frequency you need?
• Do you have any requirement for the occupied area?
• Other special requirements about the waste water recirculating treatment system you want.
*Â MOOGE TECH is a professional machine manufacturer with more than 10 years' experience. Our developing concept is quality first, service foremost, and we are looking forward to cooperating with you for a bright future.Â
* If you have any questions about our waste water recirculating treatment system, pls do not hesitate to contact me at any time!
General CNC processing usually refers to computer digital control precision machining, CNC processing lathes, CNC processing milling machines, CNC processing boring and milling machines, CNC laser cutting, etc.
CNC machining has the following advantages:
â‘ The number of tooling is greatly reduced, and complex tooling is not required for processing parts with complex shapes. If you want to change the shape and size of the part, you only need to modify the part processing program, which is suitable for new product development and modification, like iron machining parts.
â‘¡The processing quality is stable, the processing precision is high, and the repetition accuracy is high, which is suitable for the processing requirements of aircraft.
â‘¢In the case of multi-variety and small-batch production, the production efficiency is high, which can reduce the time for production preparation, machine tool adjustment, and process inspection, and the cutting time is reduced due to the use of the optimal cutting amount.
â‘£ It can process complex profiles that are difficult to process by conventional methods, and even process some unobservable processing parts.
If you need the CNC machining service including 4 axis CNC machining, CNC laser cutting services, to custom CNC fabrication like CNC machining aluminum, etc., please contact us at any time.
CNC Machining Service,CNC Fabrication,CNC Machining Aluminum,4 Axis CNC Machining,CNC Laser Cutting Services
Pro Success Development Limited , https://www.prosuccess-metal.com